Point83.com Forum Index  »  Wrenches, Gears, Lawns, and Routes  »  crank bros.
 Post new topic   Reply to topic
Page 1 of 2    Goto page 1, 2  Next
 
Razi
Posted: Wed Feb 22, 2006 12:04 pm Reply with quote
Joined: 16 Dec 2005 Posts: 866 Location: Seattle

No one in .83 seems to ride with crank brother's pedals.

Yet, many people swear by them for their durability and ease of use.
If I am looking to make the switch to clipless pedals, should I consider Crank Brothers? Or should I go with something else?

_________________
a new enemy has invaded our shores...
View user's profile Send private message
 
lieutenantsean
Posted: Wed Feb 22, 2006 12:06 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Quote:
No one in .83 seems to ride with crank brother's pedals.


Look more closely.

Personally, I ride Speedplays. Love them.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
joby
Posted: Wed Feb 22, 2006 12:08 pm Reply with quote
goes to eleven Joined: 25 Jul 2005 Posts: 3899 Location: The Cloud

Razi wrote:
No one in .83 seems to ride with crank brother's pedals.

Yet, many people swear by them for their durability and ease of use.
If I am looking to make the switch to clipless pedals, should I consider Crank Brothers? Or should I go with something else?


Standards are worth a lot. As much as there is one, SPD is the standard.

SPD compatible Shoes, cleats and Pedals are available from lots of manufaturers.
All load bearing components are metal.
They're easy to get in and out of.
They're cheap.
View user's profile Send private message
 
lieutenantsean
Posted: Wed Feb 22, 2006 12:26 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Only about half right.

SPD shoes are one standard, Look is the other. Have you taken a gander at the new SPD shoes. Three holes about where you would expect them to be for look pedals.

But, still, having a standard is damn convenient.

Other than Looks, the load bearing components on most pedals are metal.

They aren't any easier to get into or out of than any other system I've used.

They actually aren't a hell of a lot cheaper than most other systems either.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
Aaron
Posted: Wed Feb 22, 2006 12:30 pm Reply with quote
Joined: 25 Jul 2005 Posts: 4645

I ride Crank Brother's on all my bikes. I have Eggbeaters, Mallets and Candies
View user's profile Send private message
 
leah
Posted: Wed Feb 22, 2006 12:34 pm Reply with quote
elder Joined: 10 Feb 2006 Posts: 594 Location: The Bucket

my dad and stepmom swear by speedplay for the float. i don't blame them, but their components are more difficult to find and, i think, more expensive.

_________________
putting the gay back into gangsta.
View user's profile Send private message
 
lieutenantsean
Posted: Wed Feb 22, 2006 12:37 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Your parents are right to do so. The free float feels awesome once you get used to it.

The parts aren't that hard to come by. I could walk into Aaron's shop and find everything I need to completely rebuild mine.

But yeah, they are a bit spendy. Cheaper than knee surgery though.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
Aaron
Posted: Wed Feb 22, 2006 12:38 pm Reply with quote
Joined: 25 Jul 2005 Posts: 4645

leah wrote:
my dad and stepmom swear by speedplay for the float. i don't blame them, but their components are more difficult to find and, i think, more expensive.


They are not any more expensive than equal quality SPD or Crank Bros or any other pedal. Also Speedplay's design has been the same for 15 years and parts are readily available for all thier pedals. I stock the Frog model. I used to use Frogs before I got an employee purchase on Crank Bros. I tried them not because they are better or I didn't like Frogs, but just to be different. Both are good pedal systems, as are Shimano.
View user's profile Send private message
 
henry
Posted: Wed Feb 22, 2006 12:42 pm Reply with quote
somewhat piggish Joined: 05 Aug 2005 Posts: 5415 Location: on porch with shotgun

lieutenantsean wrote:


But yeah, they are a bit spendy. Cheaper than knee surgery though.


I've already had knee surgery so I can ride whatever i want, right??

_________________
winter men
View user's profile Send private message
 
lieutenantsean
Posted: Wed Feb 22, 2006 12:49 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

If you didn't learn the first time, do what you fucking want man.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
henry
Posted: Wed Feb 22, 2006 1:01 pm Reply with quote
somewhat piggish Joined: 05 Aug 2005 Posts: 5415 Location: on porch with shotgun

lieutenantsean wrote:
If you didn't learn the first time, do what you fucking want man.


i did learn! i learned to get my fucking hips up and ski and ski like a man. and i learned that girls are way more impressed with a good skier that can walk to the car than a good skier who gets carried to the car in a ski patrol tobagan. of course it took a couple tries... but i did learn. ;)

the best was the ride from the top of Horstman Glacier to Whistler Village in a Tobagan. dude was fast as hell, did it in like 15 minutes with no brakeman.

_________________
winter men
View user's profile Send private message
 
lieutenantsean
Posted: Wed Feb 22, 2006 1:03 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Did you learn that it's pointless to try and impress girls with displays of athletic prowess?

Seriously though. If you've already had knee surgery, take good care of your knees.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
jillita
Posted: Wed Feb 22, 2006 1:09 pm Reply with quote
Joined: 13 Oct 2005 Posts: 744 Location: the westside

I have two sets of Eggbeaters that I swear by, but only for commuting and mtb and cx. They have way too much float for track, where if you come out you're toast, although I've heard of people riding brakeless on the street with them. SPDs are a dying breed. Too many pieces and parts. Eggbeaters are simplicity in machinery defined.
View user's profile Send private message Send e-mail
 
lieutenantsean
Posted: Wed Feb 22, 2006 1:14 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Speedplays are simpler. But I dig the elegance of the Eggbeaters for some reason.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
Aaron
Posted: Wed Feb 22, 2006 1:36 pm Reply with quote
Joined: 25 Jul 2005 Posts: 4645

lieutenantsean wrote:
Speedplays are simpler. But I dig the elegance of the Eggbeaters for some reason.


In deed, Speedplays only have one moving part and it is in the cleat!
View user's profile Send private message
 
Aaron
Posted: Wed Feb 22, 2006 1:36 pm Reply with quote
Joined: 25 Jul 2005 Posts: 4645

lieutenantsean wrote:
Speedplays are simpler. But I dig the elegance of the Eggbeaters for some reason.


In deed, Speedplays only have one moving part and it is in the cleat!
View user's profile Send private message
 
Razi
Posted: Wed Feb 22, 2006 2:09 pm Reply with quote
Joined: 16 Dec 2005 Posts: 866 Location: Seattle

So Aaron,
Should I roll with eggbeaters or candys?
Candys seem to provide better contact, and they come in some sexy colors too.

_________________
a new enemy has invaded our shores...
View user's profile Send private message
 
lantius
Posted: Wed Feb 22, 2006 2:11 pm Reply with quote
1337 Joined: 22 Jul 2005 Posts: 6705 Location: right over

i have beat to shit all kinds of spd mtn pedals, shoes, and cleats, mixing and matching different brands on a dozen different bikes and three or four pairs of shoes (i wear them until the sole breaks in half). i've been happy. plus they are cheap, cheap, cheap. i think my last pair of pedals i got from superperfgomance for $20.

i thought about moving to eggbeaters but conversation here has been that the cleats are soft and wear really quickly, which is fine if you are able to get them out of your shoe to replace them. i've never been able to salvage the cleats from my shoes by the time i am done with them.

on the flip side, i do have a pair of spd pedals that broke and failed on one side, and it sure is annoying to ride with those.
View user's profile Send private message Send e-mail
 
dennyt
Posted: Wed Feb 22, 2006 2:15 pm Reply with quote
rocket mechanic Joined: 02 Aug 2005 Posts: 2708

Yeah, I'm about to spring for some new shoes, as my left sole is cracked about halfway across the ball of my foot... it would really suck to break a shoe on the first hill on bainbridge island.
View user's profile Send private message
 
jillita
Posted: Wed Feb 22, 2006 2:22 pm Reply with quote
Joined: 13 Oct 2005 Posts: 744 Location: the westside

lantius wrote:
i thought about moving to eggbeaters but conversation here has been that the cleats are soft and wear really quickly, which is fine if you are able to get them out of your shoe to replace them. i've never been able to salvage the cleats from my shoes by the time i am done with them.


Horsepucky. I've had my cleats for almost two years w/no problems. Maybe if you walk around on them all day they're wear out, but so would anything else.
View user's profile Send private message Send e-mail
 
Torch
Posted: Wed Feb 22, 2006 2:28 pm Reply with quote
Terrance Joined: 24 Jul 2005 Posts: 1637 Location: Amsterdam, The Netherlands

pedal retention systems are for amateurs.

_________________
"the only difference between me and a madman is that i am not mad."

- Salvador Dali
View user's profile Send private message
 
berserk
Posted: Wed Feb 22, 2006 3:35 pm Reply with quote
Joined: 17 Feb 2006 Posts: 120 Location: Seattle/Bothell

I started with SPD, then went to the froggies. On the road they're great, but during cyclocross they suck ass.

The cleat would get all sandy/dirty and I'd spend half my time either trying to clip in or wondering if I really was (clipped in).

It's valuable time taken away when I'm defending spot 18 in the cross C race.

So I switched to the candies, and I'm glad I did. They hold great, and easy enough to get in and out of.

I'm a sucker for wanting to have the same cleat system across all bikes and shoes, so "a local big chain shop" had the eggbeaters on sale for 49 a few months ago and I picked those up for the road bike as well.

If you're keeping them clean (not really doing tons of muddy riding and such) the froggies were just fine. Easier to get into/out of IMO.

<pimp my stuff>I've got two mtn pairs of the froggies if you decide to go that route for cheap</pimp my stuff>
View user's profile Send private message Visit poster's website
 
lieutenantsean
Posted: Wed Feb 22, 2006 3:45 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

I've read your complaint about the Speedplays elsewhere.

Looking at the things, it seems pretty obvious to me that would be a problem. The tolerances between the cleat and the pedal are way too tight for them to work when they are all nasty with mud, blood and the hair of your competitors.

Looking at the crank bros. pedals, it also seems obvious that wouldn't be as big of an issue.

I don't ride in mud or sand (on purpose) so that isn't a problem. I like them because of all the float, they are simple, and totally maintainable. I think it was just a piss-poor marketing choice to call them MTB pedals.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
jillita
Posted: Wed Feb 22, 2006 3:58 pm Reply with quote
Joined: 13 Oct 2005 Posts: 744 Location: the westside

berserk wrote:
I started with SPD, then went to the froggies. On the road they're great, but during cyclocross they suck ass.

The cleat would get all sandy/dirty and I'd spend half my time either trying to clip in or wondering if I really was (clipped in).

It's valuable time taken away when I'm defending spot 18 in the cross C race.

So I switched to the candies, and I'm glad I did. They hold great, and easy enough to get in and out of.


That's odd that you liked the Candies for CX. A bunch of my friends bought them even though I warned them of my bad experiences getting in and out of them ("Get the Eggbeaters," I said. "The Candies suck and you will waste time trying to clip in. I have them and they suck." Did they get the Eggbeaters? No. The Candies were on sale.). At every CX race they'd cross the finish bitching that they couldn't clip in the whole race. They even carved out a larger space for the pedal to fit onto their $200 mtb shoes, but it didn't help when there was mud, sand, skin, etc stuck in the platform. So much for sale items.

No one listens to Jilly....
View user's profile Send private message Send e-mail
 
berserk
Posted: Wed Feb 22, 2006 4:57 pm Reply with quote
Joined: 17 Feb 2006 Posts: 120 Location: Seattle/Bothell

harlot wrote:
berserk wrote:
I started with SPD, then went to the froggies. On the road they're great, but during cyclocross they suck ass.

The cleat would get all sandy/dirty and I'd spend half my time either trying to clip in or wondering if I really was (clipped in).

It's valuable time taken away when I'm defending spot 18 in the cross C race.

So I switched to the candies, and I'm glad I did. They hold great, and easy enough to get in and out of.


That's odd that you liked the Candies for CX. A bunch of my friends bought them even though I warned them of my bad experiences getting in and out of them ("Get the Eggbeaters," I said. "The Candies suck and you will waste time trying to clip in. I have them and they suck." Did they get the Eggbeaters? No. The Candies were on sale.). At every CX race they'd cross the finish bitching that they couldn't clip in the whole race. They even carved out a larger space for the pedal to fit onto their $200 mtb shoes, but it didn't help when there was mud, sand, skin, etc stuck in the platform. So much for sale items.

No one listens to Jilly....


I haven't had any probs getting into/out of, and the extra "platform" seems to help with feeling like you have more pedal there. That last bit could totally be psychological though for sure.
View user's profile Send private message Visit poster's website
 
lantius
Posted: Wed Feb 22, 2006 4:59 pm Reply with quote
1337 Joined: 22 Jul 2005 Posts: 6705 Location: right over

berserk wrote:
I haven't had any probs getting into/out of, and the extra "platform" seems to help with feeling like you have more pedal there. That last bit could totally be psychological though for sure.


it should be psychological if you have good shoes, right?
View user's profile Send private message Send e-mail
 
sekai
Posted: Wed Feb 22, 2006 5:05 pm Reply with quote
Joined: 25 Jul 2005 Posts: 1466 Location: on the lake

http://www.coombe.com/coombe.html

these rock! no moving parts to wear, ultra low profile for sick cornering.....
View user's profile Send private message
 
SeditiousCanary
Posted: Wed Feb 22, 2006 7:49 pm Reply with quote
sorry, can't make it! Joined: 26 Jan 2006 Posts: 2315 Location: Fremont Troll

I got my first set of SPD-737 in '92. I still ride them. Changed my cleats once and my shoes three times (two sets of Specialized Ground Control shoes and two sets of Sidi Dominator 3 shoes).

I'm one ACL reconstruction into my OEM set of knees.

So far, no issues and no concerns.
View user's profile Send private message Send e-mail
 
Alastair
Posted: Wed Feb 22, 2006 8:31 pm Reply with quote
Joined: 12 Jan 2006 Posts: 475 Location: U-district/Ravenna

www.coombe.com wrote:
Plasma Nitriding of COOMBE PRO pedal bodies produces a ceramic outer layer, providing outstanding durability and wear resistance!


Plasma Nitriding?! WTF is that?
View user's profile Send private message Send e-mail
 
lieutenantsean
Posted: Wed Feb 22, 2006 8:49 pm Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Something to do with plasma and nitrides?

Maybe plasma nitrides are some wicked new type of head light.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
berserk
Posted: Wed Feb 22, 2006 9:41 pm Reply with quote
Joined: 17 Feb 2006 Posts: 120 Location: Seattle/Bothell

harlot wrote:


That's odd that you liked the Candies for CX. A bunch of my friends bought them even though I warned them of my bad experiences getting in and out of them ("Get the Eggbeaters," I said. "The Candies suck and you will waste time trying to clip in. I have them and they suck." Did they get the Eggbeaters? No. The Candies were on sale.). At every CX race they'd cross the finish bitching that they couldn't clip in the whole race. They even carved out a larger space for the pedal to fit onto their $200 mtb shoes, but it didn't help when there was mud, sand, skin, etc stuck in the platform. So much for sale items.

No one listens to Jilly....


So you got me thinking. The shoes I use with the candies are more commute friendly and/or lower end mtn shoes.

Well, ok I wouldn't say lower end mtn shoes per say, but they aren't the super stiff ones you generally find in more expensive shoes. A sport shoe I suppose they're called. I had some Shimano shoes that I've just replaced with some Specialized BG Taho MTB shoes. Both of these work perfectly with the candies.


So when I got home tonight I put on my "more expensive, stiffer mtn shoes" (which are totally fine on the egg-beaters) and tried them on the candies. Guess what. The drive side didn't fully engage. This leads me to think you've definitely got some valid points.

I'll try putting the shim between the cleat/shoe and see if that helps.

I think the moral of this story is to listen to Jill.
View user's profile Send private message Visit poster's website
 
Aaron
Posted: Wed Feb 22, 2006 11:02 pm Reply with quote
Joined: 25 Jul 2005 Posts: 4645

Handsome Jilly wrote:
No one listens to Jilly....


I listen cuz I am a SNAG.
View user's profile Send private message
 
jillita
Posted: Thu Feb 23, 2006 8:50 am Reply with quote
Joined: 13 Oct 2005 Posts: 744 Location: the westside

berserk wrote:
I think the moral of this story is to listen to Jill.


I think the moral is that things are usually on sale for a reason.


Aaron wrote:
Handsome Jilly wrote:
No one listens to Jilly....


Stop it!!!! You're making me feel like I should have a beard!! YUCK!!!
View user's profile Send private message Send e-mail
 
berserk
Posted: Thu Feb 23, 2006 8:57 am Reply with quote
Joined: 17 Feb 2006 Posts: 120 Location: Seattle/Bothell

[quote="harlot"]
I think the moral is that things are usually on sale for a reason.
/quote]

Well, to clarify a bit. The candies I got for regular price, the eggbeaters were the ones on sale.

Generally though, I agree with you. I do tend to wait for the last year model sales just so I don't end up paying full price for things.
View user's profile Send private message Visit poster's website
 
jillita
Posted: Thu Feb 23, 2006 9:23 am Reply with quote
Joined: 13 Oct 2005 Posts: 744 Location: the westside

Yeah I buy stuff on sale all the time too. Like my sweet new skis that were on closeout for $60 and retail for $460. They were getting rid of old stock.

Sometimes sale items are the shit, sometimes just shit.
View user's profile Send private message Send e-mail
 
lieutenantsean
Posted: Thu Feb 23, 2006 9:29 am Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Just picked up new cycling shoes stupid cheap because REI was trying to dump their stock.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
berserk
Posted: Thu Feb 23, 2006 9:30 am Reply with quote
Joined: 17 Feb 2006 Posts: 120 Location: Seattle/Bothell

lieutenantsean wrote:
Just picked up new cycling shoes stupid cheap because REI was trying to dump their stock.


Which shoes?
View user's profile Send private message Visit poster's website
 
lieutenantsean
Posted: Thu Feb 23, 2006 9:34 am Reply with quote
Joined: 10 Oct 2005 Posts: 1255

Pearl Izumi Juice MTB shoes.

Before you start going on about how they suck, I wanted MTB shoes so I could walk in them easier than road shoes. They'll probably never see use off-road.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
berserk
Posted: Thu Feb 23, 2006 9:40 am Reply with quote
Joined: 17 Feb 2006 Posts: 120 Location: Seattle/Bothell

lieutenantsean wrote:
Pearl Izumi Juice MTB shoes.

Before you start going on about how they suck, I wanted MTB shoes so I could walk in them easier than road shoes. They'll probably never see use off-road.


Dude.

I do the same thing for the same reason.

My main beef is I have sorta wide feet, so most shoes tend to not work out for me.

On the same note though, I can't really justify spending 250 on the Sidi Mega Dominators (mega == wide width)
View user's profile Send private message Visit poster's website
 
lieutenantsean
Posted: Thu Feb 23, 2006 9:48 am Reply with quote
Joined: 10 Oct 2005 Posts: 1255

My problem's with the arches. I have size 11.5 arches on size 10.5 feet. I've never had any problems with me, and various doctors have told me that fallen arches or nonsense like that will never be an issue for me.

Good for rock climbing because it makes my feet more rigid.

The other thing is I hate my feet being cold. Going with the larger shoes helps keep my feet warmer.

I bought my last pair of shoes in the same manner. They are still in good shape, but are my "proper" size so my feet get cold, particularly when I'm wearing warm socks.

I'd looked at some of the higher end shoes. Don't need all that stiffness (I said stiff...) and I didn't want to spend all that much money.

_________________
Bringing you Retro-Grouchiness since 1984
View user's profile Send private message Send e-mail Visit poster's website
 
Reply to topic
Page 1 of 2    Goto page 1, 2  Next
Point83.com Forum Index  »  Wrenches, Gears, Lawns, and Routes  »  crank bros.
All times are GMT - 8 Hours
The time now is Fri Aug 11, 2023 4:58 am
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
 


Forums | Calendar | TOS | Tapirs

© 2004-2015 Point83
Point83 is a wholly owned subsidiary of the Joby Lafky Corporation