Joined: 12 Jan 2006Posts: 475Location: U-district/Ravenna
I'm going to post this here for a couple of days, before throwing it at the Craigslist massive. Got some leftovers from swapping parts off the Colnago.
Campagnolo Record Crankset - $100 - 10spd, alloy, 52/39, 172.5mm, has some scratches but are in great shape
Campagnolo Chorus Bottom Bracket - $10 - Italian threaded, 70mmx102mm
Campagnolo Chorus 10spd shifters - $75
Deda 215 Handlebars - FREE - 42cm o-o, shallow drop, These are free because they were on my bike during my big wreck. They look absolutely fine, but they have been wrecked and you'll be riding at your own risk.
If you want any of these call dibs on the forum and I'll make arrangements to get you the parts. Proceeds go towards Sarah and I in Amsterdam.
zuvembi
Posted: Mon May 14, 2007 8:52 am
Joined: 24 Jul 2005Posts: 942Location: Little Addis Ababa
Alastair wrote:
Campagnolo Chorus 10spd shifters - $75
I am very possibly interested in these. What year are they?
I mainly want to make sure the front shifter is ratcheting not index.
_________________ When the revolution comes, we're going to need a longer wall
Alastair
Posted: Mon May 14, 2007 10:56 pm
Joined: 12 Jan 2006Posts: 475Location: U-district/Ravenna
zuvembi wrote:
Alastair wrote:
Campagnolo Chorus 10spd shifters - $75
I am very possibly interested in these. What year are they?
I am unsure of the year. I do know that Campy stopped making them in alloy after a certain point, and these are the alloy ones. They do have the ratcheting shifting of modern Campy.
zuvembi
Posted: Tue May 15, 2007 8:24 am
Joined: 24 Jul 2005Posts: 942Location: Little Addis Ababa
Alastair wrote:
zuvembi wrote:
Alastair wrote:
Campagnolo Chorus 10spd shifters - $75
I am very possibly interested in these. What year are they?
I am unsure of the year. I do know that Campy stopped making them in alloy after a certain point, and these are the alloy ones. They do have the ratcheting shifting of modern Campy.
They only recently changed to index shifting on the front, and now that I think about it, only on the bottom two lines.
I'll take them. Are you going to be on the Thursday ride?
_________________ When the revolution comes, we're going to need a longer wall
PJ Diddy
Posted: Wed May 16, 2007 8:50 am
Joined: 25 Jul 2005Posts: 567Location: magnolia
Alastair are the cranks square taper? If so I might have to pull the trigger. thanks paul
_________________ "They better stop cause I'm NOT!" Paul
lantius
Posted: Wed May 16, 2007 8:54 am
1337Joined: 22 Jul 2005Posts: 6705Location: right over
PJ Diddy wrote:
Alastair are the cranks square taper? If so I might have to pull the trigger. thanks paul
unless your current crankset is campy, the tapers are different from what you have now and you'd need a new bottom bracket. fyi.
PJ Diddy
Posted: Wed May 16, 2007 8:58 am
Joined: 25 Jul 2005Posts: 567Location: magnolia
Ya my current cranks are campy I didn't know that there was different kinds of square taper. thanks Lee
_________________ "They better stop cause I'm NOT!" Paul
the dreaded ben
Posted: Wed May 16, 2007 8:59 am
Grumpy GreebJoined: 20 Aug 2005Posts: 5329Location: flavor country
PJ Diddy wrote:
Alastair are the cranks square taper? If so I might have to pull the trigger. thanks paul
note that the campy square taper differs from the standard square taper by a few degrees, thus rendering them incompatible.
er wait, your bianchi has campy already huh?
zuvembi
Posted: Wed May 16, 2007 9:09 am
Joined: 24 Jul 2005Posts: 942Location: Little Addis Ababa
the dreaded ben wrote:
PJ Diddy wrote:
Alastair are the cranks square taper? If so I might have to pull the trigger. thanks paul
note that the campy square taper differs from the standard square taper by a few degrees, thus rendering them incompatible.
Not quite right. It has the same 2 degree taper. But campy starts out smaller.
_________________ When the revolution comes, we're going to need a longer wall
joeball
Posted: Wed May 16, 2007 9:10 am
Joined: 24 Jul 2005Posts: 6037Location: Ether
To make it even more tough for you Paul a Campy Record and Chorus Cranks takes a shorter BB spindle than the other lower models, You had Centaur or Veloce right? You better grab his BB also if you get the cranks. What is wrong with the ones you have on there now?
lantius
Posted: Wed May 16, 2007 9:11 am
1337Joined: 22 Jul 2005Posts: 6705Location: right over
joeball wrote:
To make it even more tough for you Paul a Campy Record and Chorus Cranks takes a shorter BB spindle than the other lower models, You had Centaur or Veloce right? You better grab his BB also if you get the cranks. What is wrong with the ones you have on there now?
he jacked up the pedal threading on the drive side.
the dreaded ben
Posted: Wed May 16, 2007 9:18 am
Grumpy GreebJoined: 20 Aug 2005Posts: 5329Location: flavor country
lantius wrote:
joeball wrote:
To make it even more tough for you Paul a Campy Record and Chorus Cranks takes a shorter BB spindle than the other lower models, You had Centaur or Veloce right? You better grab his BB also if you get the cranks. What is wrong with the ones you have on there now?
he jacked up the pedal threading on the drive side.
am i the only one still jank enough to suggest a helicoil?
i'm sure aaron has them.
Alex
Posted: Wed May 16, 2007 9:58 am
Joined: 18 May 2006Posts: 3128Location: Roosevelt
the dreaded ben wrote:
am i the only one still jank enough to suggest a helicoil?
i'm sure aaron has them.
Yeah, helicoil it up. If they are only lightly fucked then just a retap might be enough.
lantius
Posted: Wed May 16, 2007 10:17 am
1337Joined: 22 Jul 2005Posts: 6705Location: right over
they are jacked like pedal wobbling in the crankarm jacked.
Alastair
Posted: Wed May 16, 2007 5:39 pm
Joined: 12 Jan 2006Posts: 475Location: U-district/Ravenna
I should be at the thursday ride, I'll bring the cranks, bb, and shifters.
Zuvembi has dibs on the shifters
PJ Diddy on the cranks if he still wants 'em.
PJ Diddy
Posted: Sun May 20, 2007 6:58 pm
Joined: 25 Jul 2005Posts: 567Location: magnolia
Alastair do you still have the cranks and BB if so i want them.
thanks
paul
_________________ "They better stop cause I'm NOT!" Paul
Alastair
Posted: Tue May 22, 2007 7:58 am
Joined: 12 Jan 2006Posts: 475Location: U-district/Ravenna
They will be yours. After last week's false start, I am planning on being at the ride this Thursday. If you won't be, I have tomorrow off, and I could likely deliver them.
zuvembi
Posted: Tue May 22, 2007 8:31 am
Joined: 24 Jul 2005Posts: 942Location: Little Addis Ababa
Thursday I'll be in Philadelphia. Tomorrow might work depending on the timing.
_________________ When the revolution comes, we're going to need a longer wall
PJ Diddy
Posted: Wed May 23, 2007 5:44 pm
Joined: 25 Jul 2005Posts: 567Location: magnolia
alastair I'll be there thursday. please bring the bb, and cranks thanks paul
_________________ "They better stop cause I'm NOT!" Paul
All times are GMT - 8 Hours
The time now is Fri Aug 11, 2023 6:10 pm
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Joined: 24 Jul 2005
Posts: 942
Location: Little Addis Ababa
Joined: 25 Jul 2005
Posts: 567
Location: magnolia
1337
Joined: 22 Jul 2005
Posts: 6705
Location: right over
Grumpy Greeb
Joined: 20 Aug 2005
Posts: 5329
Location: flavor country
Joined: 24 Jul 2005
Posts: 6037
Location: Ether
Joined: 18 May 2006
Posts: 3128
Location: Roosevelt
